TA 651

Alkaline swelling thickening agent

【Product Overview】

Because 651 does not contain the association structure, so its latex paint thickening rate is low, generally not as the main thickendering agent, but as a synergistic thickening agent or replace cellulose to obtain excellent water resistance, improve the storage stability of the coating, economy and convenience.

【Physical and chemical properties】

【Application advantage】

1、The use effect is not selective for the water-based system;

2、651 It mainly has a good thickening effect for the aqueous phase of various emulsion and aqueous solution system;

3、Especially suitable for all kinds of latex paint, adhesives and other water-based system thickening, etc;

4、Can be added to help the water phenomenon of the paint to improve the resistance to water;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.5-3.0%;

Dilute the product with water or add it directly, slowly add it to the thickening system under appropriate mixing, and adjust the PH value to 7.5-9.0 (the PH value of the thickening system can be adjusted before and after the addition of the product) until the desired viscosity is reached;

No cations, multivalent metal ions and other unstable substances can be contacted during storage and use.

【Packaging and Storage】

25,50,200 kg / barrel;

It should be closed after use;

Put in a temperature of 5-35℃, avoid inposation and freezing.

                                                                TA 656

Association-type emulsion thickener

【Product Overview】

656 is a hydrophobic modified emulsion thickener, which has the dual advantages of water-soluble macromolecules and association network; 656 can be used alone or together with other types of thickener. It has the characteristics of high thickening ratio, proper rheology and easy addition; especially suitable for the thickening of water systems such as latex paint and adhesive.

【Physical and chemical properties】

【Application advantage】

1、656 for a variety of emulsion, aqueous solution system has a good thickening effect, cost performance is very high;

2、Improve the storage stability of coatings;

3、Increase the luster of the paint;

4、Improve the leveling performance of the coating;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.5-3.0%;

Dilute the product with water or directly, slowly add it to the system to be thickened under appropriate mixing, and adjust the PH value of the system to 7.5-9.0 (the PH value of the system can be adjusted before and after the addition of the product) until the desired viscosity is reached;

It is suggested that the PH value of the thickening system should be tested after the addition of the product and adjusted if necessary;

No cations, multivalent metal ions and other unstable substances can be contacted during storage and use.

【Packaging and Storage】

30,50 kg / barrel;

It should be closed after use;

Put it in a temperature of 5-35℃, avoid insolation and freezing.

TA 680

Association-type emulsion thickener

【Product Overview】

680 is a hydrophobic modified emulsion thickening agent, which has the dual advantages of water-soluble macromolecules and forming association network; 680 mainly has a good thickening effect on various emulsion and aqueous solution systems.680 can be used as the preferred thickener or synergistic thickener for waterborne coatings; due to the particularity of 680 structure, it may take 24 hours to finish the coating preparation; suitable for thickening of waterborne systems such as latex paints and adhesives. Especially suitable for vinegar C and other interior wall coating.

【Physical and chemical properties】

【Application advantage】

1、The coating with 680 as the main thickening agent has low touch denaturation and high thickening rate, which can reduce or even not add non-ionic polyurethane rheological modifier to obtain excellent fluidity and smoothness. It can significantly improve the medium shear viscosity, which can effectively improve the fluidity and smoothness of the coating with excellent performance in benzene propylene, pure propylene and vinegar propylene systems;

2、Improve the storage stability of coatings;

3、Increase the luster of the paint;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.5-1.2%;

Dilute the product with water, slowly add it to the thickening system under appropriate mixing, and adjust the PH value of the system to 7.5-9.0 (the PH value of the thickening system can be adjusted before and after the addition of the product) until the desired viscosity is reached;

It is suggested that the PH value of the thickening system should be tested after the addition of the product and adjusted if necessary;

No cations, multivalent metal ions and other unstable substances can be contacted during storage and use.

【Packaging and Storage】

30,200 kg / barrel;

It should be closed after use;

Put it in a temperature of 5-35℃, avoid insolation and freezing.

TA 681

Association-type emulsion thickener

【Product Overview】

681 is a hydrophobic modified emulsion thickening agent, which has the dual advantages of water-soluble macromolecules and association network; 681 has good thickening effect on various emulsion and aqueous solution systems.681 can be used as the preferred thickener or synergistic thickener for waterborne coatings; due to the particularity of 681 structure, it may take 24 hours to be suitable for thickening of waterborne systems such as latex paints and adhesives. Especially suitable for pure c exterior wall coating.

【Physical and chemical properties】

【Application advantage】

1、It has excellent thickening ratio and less dosage;

2、The coating with 681 as the main thickening agent has low touch denaturation and high thickening rate, which can reduce or even not add non-ionic polyurethane rheological modifier to obtain excellent fluidity and smoothness. It can significantly improve the medium shear viscosity, which can effectively improve the fluidity and smoothness of the coating with excellent performance in benzene propylene, pure propylene and vinegar propylene systems;

3、Improve the storage stability of coatings;

4、Increase the luster of the paint;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.3-1.0%;

Dilute the product with water, slowly add it to the thickening system under appropriate mixing, and adjust the PH value of the system to 7.5-9.0 (the PH value of the thickening system can be adjusted before and after the addition of the product) until the desired viscosity is reached;

It is suggested that the PH value of the thickening system should be tested after the addition of the product and adjusted if necessary;

No cations, multivalent metal ions and other unstable substances can be contacted during storage and use.

【Packaging and Storage】

30,200 kg / barrel;

It should be closed after use;

Put it in a temperature of 5-35℃, avoid insolation and freezing.

TA 685

Association-type emulsion thickener

【Product Overview】

658 is a hydrophobic modified emulsion thickening agent, which has the dual advantages of water-soluble macromolecules and association network; 658 has good thickening effect on various emulsion and aqueous solution systems. It has the characteristics of high thickening ratio, less dosage, appropriate rheology, easy to add and so on; especially suitable for all kinds of latex paint, adhesives and other water system thickening.

【Physical and chemical properties】

【Application advantage】

1、658 has a high thickening effect on various emulsion, aqueous solution system, outstanding performance, excellent cost performance;

2、Significantly improve the storage stability of coatings;

3、Increase the luster of the paint;

4、Improve the effect of paint opening tank, improve the fullness;

5、Improve the paint in the process of color mixing float problems;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.5-3.0%;

Dilute the product with water or directly, slowly add it to the system to be thickened under appropriate mixing, and adjust the PH value of the system to 7.5-9.0 (the PH value of the system can be adjusted before and after the addition of the product) until the desired viscosity is reached;

It is suggested that the PH value of the thickening system should be tested after the addition of the product and adjusted if necessary;

No cations, multivalent metal ions and other unstable substances can be contacted during storage and use.

【Packaging and Storage】

30,200 kg / barrel;

It should be closed after use;

Put it in a temperature of 5-35℃, avoid insolation and freezing.

TA 687

Association-type emulsion thickener

【Product Overview】

687 is a hydrophobic modified emulsion thickening agent, which has the dual advantages of water-soluble macromolecules and forming association network; 687 has good thickening effect for various emulsion and aqueous solution systems.687 can be used as the preferred thickening agent or synergistic thickening agent for water-based coatings; due to the particularity of 687 structure, it may take 24 hours to prepare coatings for thickening of water systems such as latex paints and adhesives, especially for inner wall coatings such as vinegar and C.

【Physical and chemical properties】

【Application advantage】

1、The coating with 687 as the main thickening agent has low touch denaturation and higher thickening rate, which can reduce or even not add non-ionic polyurethane rheological modifier to obtain excellent fluidity and smoothness. It can significantly improve the medium shear viscosity, which can effectively improve the fluidity and smoothness of the coating with excellent performance in benzene propylene, pure propylene and vinegar propylene systems;

2、Improve the storage stability of coatings;

3、Increase the luster of the paint;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.5-2.0%;

Dilute the product with water or directly, slowly add it to the system to be thickened under appropriate mixing, and adjust the PH value of the system to 7.5-9.0 (the PH value of the system can be adjusted before and after the addition of the product) until the desired viscosity is reached;

It is suggested that the PH value of the thickening system should be tested after the addition of the product and adjusted if necessary;

No cations, multivalent metal ions and other unstable substances can be contacted during storage and use.

【Packaging and Storage】

25,200 kg / barrel;

It should be closed after use;

Put it in a temperature of 5-35℃, avoid insolation and freezing.

TA 689

Association-type emulsion thickener

【Product Overview】

689 is a hydrophobic modified emulsion thickening agent, which has the dual advantages of water-soluble macromolecules and association network; 689 has good thickening effect on various emulsion and aqueous solution systems.689 can be used as the preferred thickener or synergistic thickener for waterborne coatings; due to the particularity of 689 structure, it may take 24 hours to achieve smooth thickening effect; suitable for thickening of waterborne systems such as latex paints and adhesives, etc. Especially suitable for pure c exterior wall coating.

【Physical and chemical properties】

【Application advantage】

1、It has excellent thickening ratio and less dosage;

2、The coating with 689 as the main thickening agent has low touch denaturation and higher thickening rate, can reduce or even add non-ionic polyurethane rheological modifier can obtain excellent fluidity and smoothness. It can significantly improve the medium shear viscosity, which can effectively improve the fluidity and smoothness of the coating with excellent performance in benzene propylene, pure propylene and vinegar propylene systems;

3、Improve the storage stability of coatings;

4、Increase the luster of the paint;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.3-1.0%;

Dilute the product with water, slowly add it to the thickening system under appropriate mixing, and adjust the PH value of the system to 7.5-9.0 (the PH value of the thickening system can be adjusted before and after the addition of the product) until the desired viscosity is reached;

It is suggested that the PH value of the thickening system should be tested after the addition of the product and adjusted if necessary;

No cations, multivalent metal ions and other unstable substances can be contacted during storage and use.

【Packaging and Storage】

30,200 kg / barrel;

It should be closed after use;

Put it in a temperature of 5-35℃, avoid insolation and freezing.

RU 700

Polyurethane rheological modifier

【Product Overview】

700 provides excellent rheological energy and good thickening effect through association; because this product is non-ionic, its missible and rheological effect are less affected by the system PH value; can effectively improve medium and high shear viscosity, and high thickening rate, give a variety of water-based system excellent flow and flow, smooth, gloss display, excellent compatibility with a variety of resin systems, and improve film formation, rheological and thickening effect has a certain selectivity, can be widely used in ink, adhesive, coating, textile or leather paste and other waterborne systems.

【Physical and chemical properties】

【Application advantage】

1、Can effectively improve the medium and high shear viscosity;

2、High thickening rate, high cost performance;

3、The rheological system is not affected by the PH value of the system, and the anti-flow hanging effect is obvious;

4、Give the paint film excellent gloss display;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-1.2%;

It is recommended that this product be diluted with water solvent (such as ethylene glycol) more than 1 time before adding;

Increasing the temperature or adding an appropriate amount of ethylene glycol and other polar solvents can improve the water dilution performance of the product;

It is suggested that when the last step is added in the production process, it should be stirred while adding, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25 or 50 kg / BBL;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 701

Polyurethane thickening agent

【Product Overview】

701 provides excellent rheological ability and good thickening effect through association; because this product is non-ionic, its missibility and rheological effect are less affected by the system PH value; can effectively improve medium and low shear viscosity, and high thickening rate, give a variety of water-based system excellent flow and flow, smooth, gloss display, excellent compatibility with a variety of resin systems, and improve film formation, rheological and thickening effect has a certain selectivity, can be widely used in ink, adhesive, coating, textile or leather paste and other waterborne systems.

【Physical and chemical properties】

【Application advantage】

1、Can effectively improve the medium and low shear viscosity;

2、High thickening rate, high cost performance;

3、The rheological system is not affected by the PH value of the system, and the anti-flow hanging effect is obvious;

4、Give the paint film excellent gloss display;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-1.2%;

It is recommended that this product with an appropriate amount of hydrophilic solvent (such as ethylene glycol monobutyl ether) diluted after more than 1 times to add, it is best to add water diluted to more than 10 times of the dosage;

Increasing the temperature can also improve the water dilution performance of the product;

It is suggested that when the last step is added in the production process, it should be stirred while adding, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25,50,1000 kg / barrel;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 703

Polyurethane catalyst

【Product Overview】

703 through association provides excellent rheological (touch, etc.) performance, good thickening effect; because this product is non-ionic, so its thickening, rheological effect is less affected by the system PH value; can effectively improve medium and low shear viscosity, and high growth rate, give a variety of water system excellent touch, luster display, water resistance, with a variety of resin system compatibility, and improve film formation, rheological and thickening effect has a certain selectivity.

【Physical and chemical properties】

【Application advantage】

1、Can effectively improve the medium and low shear viscosity;

2、High thickening rate, high cost performance;

3、The rheological system is not affected by the PH value of the system, and the anti-flow hanging effect is obvious;

4、Give the paint film excellent gloss display;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-1.2%;

This product is difficult to dilute, cannot be directly added to the application system, it is recommended that this product be dissolved with 1 times BCS solvent, and then more than 10 times of water after dilution, it is best to use impact drill strong dispersion;

Increasing the temperature can also improve the water dispersion performance of the product;

It is suggested that when the last step is added in the production process, it should be stirred while adding, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25,50,1000 kg / barrel;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 705

Polyurethane rheological modifier

【Product Overview】

705 Through association to provide excellent rheological (flow, flow equal) performance, good thickening effect; because this product is non-ionic, so its growth, rheological effect is less affected by the system PH value; can effectively improve medium and high shear viscosity, and high growth rate, give a variety of water-based system excellent flow, flow, luster display, and compatibility with a variety of resin system excellent, and improve film formation, rheological and thickening effect has a certain selectivity.

【Physical and chemical properties】

【Application advantage】

1、Can effectively improve the medium and high shear viscosity;

2、High thickening rate, high cost performance, excellent rheological ability;

3、The rheological system is not affected by the PH value of the system, and the anti-flow hanging effect is obvious;

4、Give the paint film excellent gloss display;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-1.2%;

It is recommended to dilute the product in water by more than 10 times before adding;

Increasing the temperature or adding an appropriate amount of polar solvents such as white water can improve the water dilution performance of the product;

It is suggested that when the last step is added in the production process, it should be stirred while adding, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25 or 50 kg / BBL;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 706

Polyurethane rheological modifier

【Product Overview】

706 Association provides excellent rheological (flow, flow equality) performance, good thickening effect; because this product is non-ionic, so its increase, rheological effect is less affected by the system PH value; can effectively improve medium and high shear viscosity, and high increase rate, give a variety of water-based system excellent flow and flow, flat, luster display, compatibility with a variety of resin system excellent, and improve film formation, rheological and thickening effect has a certain selectivity.

【Physical and chemical properties】

【Application advantage】

1、Ccan effectively improve the medium and high shear viscosity;

2、Excellent rheological ability, high cost performance;

3、The rheological system is not affected by the PH value of the system, and the anti-flow hanging effect is obvious;

4、Give the paint film excellent gloss display;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-1.2%;

This product can be directly diluted with water, and the water dilution performance is excellent;

It is suggested that when the last step is added in the production process, it should be stirred while adding, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25 or 50 kg / BBL;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 709

Polyurethane thickening agent

【Product Overview】

709 provides excellent rheological energy and good thickening effect through association; because this product is non-ionic, its missibility and rheological effect are less affected by the system PH value; can effectively improve the medium shear viscosity, and high growth rate, give a variety of water-based system excellent flow and flow, smooth, gloss display, excellent compatibility with a variety of resin systems, and improve the film formation, rheological and thickening effect has a certain selectivity, can be widely used in ink, adhesive, coating, textile or leather slurry.

【Physical and chemical properties】

【Application advantage】

1、Can effectively improve the medium shear viscosity;

2、High thickening rate, high cost performance;

3、The rheological system is not affected by the PH value of the system, and the anti-flow hanging effect is obvious;

4、Give the paint film excellent gloss display;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount):0.2-2.0％;

It is recommended that this product with an appropriate amount of hydrophilic solvent (such as alcohol ether) diluted after more than 1 times to add, it is best to add water diluted to more than 10 times of the dosage;

Increasing the temperature can also improve the water dilution performance of the product;

It is suggested that when the last step is added in the production process, it should be stirred while adding, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25,50,1000 kg / barrel;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 709A

Polyurethane thickening agent

【Product Overview】

709A provides excellent rheological ability and good thickening effect through association; because this product is non-ionic, its missible and rheological effect are less affected by the system PH value; can effectively improve the medium shear viscosity, and high growth rate, give a variety of water-based system excellent flow and smoothness, gloss display, excellent compatibility with a variety of resin systems, and improve film formation, rheological and thickening effect has a certain selectivity, can be widely used in ink, adhesive, coating, textile or leather slurry and other waterborne systems.

【Physical and chemical properties】

【Application advantage】

1、Can effectively improve the medium shear viscosity;

2、High thickening rate, high cost performance;

3、The rheological system is not affected by the PH value of the system, and the anti-flow hanging effect is obvious;

4、Give the paint film excellent gloss display;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-2.0％;

It is recommended that this product with an appropriate amount of hydrophilic solvent (such as ethylene glycol monobutyl ether) diluted after more than 1 times to add, it is best to add water diluted to more than 10 times of the dosage;

Increasing the temperature can also improve the water dilution performance of the product;

It is suggested that when the last step is added in the production process, it should be stirred while adding, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25,50,1000 kg / barrel;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 715

Polyurethane catalyst

【Product Overview】

715 Provide excellent rheological change (touch change, etc.) performance and excellent thickening effect through the association of special hydrophobic end groups; As this product is of a non-ionic type, Therefore, its thickening and rheological effect are less affected by the system PH value; Can effectively improve the medium and low shear viscosity, And has a higher thickening ratio, Give a variety of water systems excellent touch ability, luster display, water resistance, etc., Good compatibility with various resin systems, and improved film formation, Rheological and thickening effects have a certain selectivity, Can replace a variety of inorganic and organic thickening systems such as bentonite and cellulose in a variety of water-based occasions, Biodegradation will not occur.

【Physical and chemical properties】

【Application advantage】

1、Can effectively improve the medium and low shear viscosity;

2、With high thickening rate and excellent cost performance;

3、The rheological system is not affected by the PH value of the system, and the anti-flow hanging effect is obvious;

4、Give the paint film excellent gloss display;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount): :0.2-2.0％;

This product is difficult to dilute, cannot be directly added to the application system, it is recommended that this product be dissolved with 1 times BCS solvent, and then more than 10 times of water after dilution, it is best to use impact drill strong dispersion;

Increasing the temperature can also improve the water dispersion performance of the product;

It is suggested that when the last step is added in the production process, it should be stirred while adding, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25,50,1000 kg / barrel;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 743

Polyurethane catalyst

【Product Overview】

743 Association provides excellent rheological (touch, etc.) performance, good thickening effect; because this product is non-ionic, so its thickening, rheological effect is less affected by the system PH value; can effectively improve medium and low shear viscosity, and high growth rate, give a variety of water system excellent tensile properties, luster display, water resistance, compatibility with a variety of resin systems excellent, and improve film formation, rheological and thickening effect has a certain selectivity.

【Physical and chemical properties】

【Application advantage】

1、Can effectively improve the medium and low shear viscosity;

2、High thickening rate, high cost performance;

3、The rheological system is not affected by the PH value of the system, and the anti-flow hanging effect is obvious;

4、Give the paint film excellent gloss display;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.5-5.0％;

This product is easy to disperse in water, it is recommended that this product with more than 10 times of water after dilution, the best to use impact drill strong dispersion;

Increasing the temperature can also improve the water dispersion performance of the product;

It is suggested that when the last step is added in the production process, it should be stirred while adding, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25,50,1000 kg / barrel;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 744

Polyurethane catalyst

【Product Overview】

744 To provide excellent rheological change (touch change, etc.) performance and good thickening effect through the association of special hydrophobic end groups; As this product is of a non-ionic type, Therefore, its thickening and rheological effect are less affected by the system PH value; Can effectively improve the medium and low shear viscosity, And has a higher thickening ratio, Give a variety of water systems excellent touch ability, gloss display, water resistance, etc., Good compatibility with various resin systems and improved film formation, Rheological and thickening effects have a certain selectivity, Can replace a variety of inorganic and organic thickening systems such as bentonite and cellulose in a variety of water-based occasions, Biodegradation will not occur.

【Physical and chemical properties】

【Application advantage】

1、Can effectively improve the medium and low shear viscosity;

2、With high thickening rate and excellent cost performance;

3、The rheological system is not affected by the PH value of the system, and the anti-flow hanging effect is obvious;

4、Give the paint film excellent gloss display;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-2.0％；

Recommended dosage (wt%, in total amount): 0.5-5.0％；

This product is easy to disperse in water, it is recommended that this product with more than 10 times of water after dilution, the best to use impact drill strong dispersion;

Increasing the temperature can also improve the water dispersion performance of the product;

It is suggested that when the last step is added in the production process, it should be stirred while adding, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25,50,1000 kg / barrel;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 756

Polyurethane rheological modifier

【Product Overview】

756 provides excellent rheological (flow, flow equality) performance and good thickening effect through association; because this product is non-ionic, its thickening and rheological effect is less affected by the system PH value; the rheological effect is universal and the thickening effect has certain selectivity; 756 is not recommended to be used alone, but as synergistic thickening agent together with other thickener and rheological agents; it can effectively improve medium and high shear viscosity, low thickening ratio, giving internal and exterior wall coatings excellent flow and smoothness and luster display.

【Physical and chemical properties】

【Application advantage】

1、Provide excellent rheological (flow, flow equal) performance for paint, improve the effect of opening;

2、The rheological system is not affected by the system PH value, and the rheological effect is universal;

3、Does not affect the luster of the coating;

4、Improve the film forming performance, give paint film excellent water resistance;

5、Anti-microbial and mildew prevention;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.3-4.0%;

This product can be added directly or diluted with water by more than 1 times before adding;

Increasing the temperature or adding an appropriate amount of ethylene glycol and other polar solvents can improve the water dilution performance of the product;

It is suggested that the product is added in the last step of the production process, which should be added while stirring, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25,200 kg / barrel;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 757

Polyurethane rheological modifier

【Product Overview】

757 provides excellent rheological (flow, flow equality) performance and good thickening effect through association; because this product is non-ionic, its thickening and rheological effect is less affected by the system PH value; rheological effect is universal and the effect has certain selectivity; 757 cannot be used alone, but as synergistic rheological agent and other thickener and rheagents; it can effectively improve medium and high shear viscosity, low thickening ratio, giving internal and exterior wall coatings excellent flow and smoothness and luster display.

【Physical and chemical properties】

【Application advantage】

1、Effectively improve the ICI viscosity, but contribute little to the low shear viscosity;

2、Provide excellent rheological (flow, flow equal) performance for paint, improve the effect of opening;

3、The rheological system is not affected by the system PH value, and the rheological effect is universal;

4、Does not affect the luster of the coating;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.3-4.0%;

This product can be directly diluted with water, and the water dilution performance is excellent;

It is suggested that the product is added in the last step of the production process, which should be added while stirring, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25,200 kg / barrel;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 758

Polyether rheological modifier

【Product Overview】

758 provides excellent rheological (flow, flow equality) performance and good thickening effect through association; because this product is non-ionic, its thickening and rheological effect is less affected by the system PH value; its rheological and enhancement effect is universal; 758 cannot be used alone, but as synergistic leveling agent and other thickening and changing agents; it can effectively improve medium and high shear viscosity, low increase ratio, and give internal and external wall coatings excellent flow and consistency.

【Physical and chemical properties】

【Application advantage】

1、Has no association structure, no selectivity to the system, is an effective modifier of various low-grade products;

2、Provide excellent rheological (flow, flow equal) performance for the paint, and improve the tank opening effect and storage stability;

3、The rheological system is not affected by the system PH value, and the rheological effect is universal;

4、Does not affect the luster of the coating;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.3-4.0%;

This product can be added directly to the product;

It is suggested that the product is added in the last step of the production process, which should be added while stirring, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25,200 kg / barrel;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 770

Polyurethane rheological modifier

【Product Overview】

770 provides excellent rheological (flow, flow equality) performance and good thickening effect through association; because this product is non-ionic, its thickening and rheological effect is less affected by the system PH value; rheological effect is universal and the effect has certain selectivity; 770 is not recommended to be used alone, but as a agent with other thickening and rheagents; suitable for various high and medium emulsion paint and other water-based systems.

【Physical and chemical properties】

【Application advantage】

1、To provide excellent rheological (flow, flow equal) performance for the coating;

2、The rheological system is not affected by the system PH value, and the rheological effect is universal;

3、Does not affect the luster of the coating;

4、Give the paint film excellent water resistance;

5、Anti-microbial and mildew prevention;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.3-2.5%;

This product can be added directly or diluted with water by more than 1 times before adding;

Increasing the temperature or adding an appropriate amount of ethylene glycol and other polar solvents can improve the water dilution performance of the product;

It is suggested that the product is added in the last step of the production process, which should be added while stirring, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25,200 kg / barrel;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

Put it in a temperature of 5-35℃, avoid insolation and freezing.

RU 790

Polyurethane rheological modifier

【Product Overview】

790 provides excellent rheological association (flow, flow equality) performance, good thickening effect; because this product is non-ionic, its increase, rheological effect is less affected by the system PH value; can effectively improve medium and high shear viscosity, and high growth rate, give a variety of water-based system excellent flow and flow, flat, luster display, compatibility with a variety of resin systems excellent, and improve film formation, rheological and thickening effect has a certain selectivity.

【Physical and chemical properties】

【Application advantage】

1、Can effectively improve the medium and high shear viscosity；

2、High thickening rate, high cost performance；

3、The rheological system is not affected by the PH value of the system, and the anti-flow hanging effect is obvious；

4、Give the paint film excellent gloss display；

5、Improve the film forming performance, give paint film excellent water resistance；

6、Microorganisms and mildew；

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-1.2%;

It is recommended that this product be diluted with water solvent (such as ethylene glycol) more than 1 time before adding;

Increasing the temperature or adding an appropriate amount of ethylene glycol and other polar solvents can improve the water dilution performance of the product;

It is suggested that when the last step is added in the production process, it should be stirred while adding, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25 or 50 kg / BBL;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 795

Polyurethane catalyst

【Product Overview】

795 through association provides excellent rheological (touch, etc.) performance and good thickening effect; because this product is non-ionic, so its thickening, rheological effect is less affected by the system PH value; can effectively improve medium and low shear viscosity, and high growth rate, give a variety of water-based system excellent touch, luster display, water resistance, with a variety of resin systems excellent compatibility, and improve the film forming, rheological and thickening effect has a certain selectivity.

【Physical and chemical properties】

【Application advantage】

1、Can effectively improve the medium and low shear viscosity;

2、High thickening rate, high cost performance;

3、The rheological system is not affected by the PH value of the system, and the anti-flow hanging effect is obvious;

4、Give the paint film excellent gloss display;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-1.2%;

This product is difficult to dilute, cannot be directly added to the application system, it is recommended that this product be dissolved with 1 times BCS solvent, and then more than 10 times of water after dilution, it is best to use impact drill strong dispersion;

Increasing the temperature or adding an appropriate amount of polar solvents such as white water can improve the water dilution performance of the product;

It is suggested that when the last step is added in the production process, it should be stirred while adding, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25,50 kg / barrel;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RU 798

Polyurethane rheological modifier

【Product Overview】

798 provides excellent rheological association (flow, flow equality) performance, good thickening effect; because this product is non-ionic, its increase, rheological effect is less affected by the system PH value; can effectively improve medium and high shear viscosity, and high increase rate, give a variety of water-based system excellent flow and flow, flat, luster display, with a variety of resin system compatibility excellent compatibility, and improve film formation, rheological and thickening effect has a certain selectivity.

【Physical and chemical properties】

【Application advantage】

1、Can effectively improve the medium and high shear viscosity;

2、High thickening rate, high cost performance;

3、The rheological system is not affected by the PH value of the system, and the anti-flow hanging effect is obvious;

4、Give the paint film excellent gloss display;

5、Improve the film forming performance, give paint film excellent water resistance;

6、Microorganisms and mildew;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-1.2%;

It is recommended that this product use more than 10 times of water after dilution, the best impact drill strong dispersion;

Increasing the temperature or adding an appropriate amount of polar solvents such as white water can improve the water dilution performance of the product;

It is suggested that when the last step is added in the production process, it should be stirred while adding, and the amount should be added to achieve the desired effect.

【Packaging and Storage】

25,50 kg / barrel;

This product at low temperature will lead to flow difficulties, turbidity increase, increase the temperature to make the product back to the original state can be used;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

RM 805

Polyethylene-modified rheometer

【Product Overview】

RM-805, as a complex with various functions such as thickening, wetting dispersion and suspension stability (excellent delamination resistance and microscopic separation of insoluble solid and liquid), can form a three-dimensional network after addition, so that the palpable fluidity can prevent settlement and improve flow resistance. Has a high thickening rate, give a variety of water system excellent touch properties, luster, etc., with a variety of resin system compatibility, and improve film, rheological, the effect has a certain selectivity, can be in a variety of water-based occasions instead of bentonite, cellulose and other inorganic, organic thickening system, less side effects.

【Physical and chemical properties】

【Application advantage】

1、Excellent thickening effect; less viscosity loss after thinning; moisturizing (prevent peeling); almost no or little effect on gloss; less thickening.

2、Excellent foam depression performance of hydrophobic modified import: it can greatly reduce the amount of antifoam agent, which is especially effective for high viscosity system.

3、Excellent viscosity stability and compatibility: the system of PH = 2-12 (especially for the thickening of vinegar emulsion, etc.) and the viscosity changes between 5-90℃; not sensitive to many electrolytes, i. e. the presence of many salts has little effect on the viscosity; not sensitive to the solvent, and other thickening agents.

4、The existence of superbranch dispersant and excellent suspension stability will improve the color spread, improve the orientation effect of aluminum powder (isometallic powder), and have clear color layers; excellent suspension stability: provide excellent settlement resistance (anti-stratification) to waterborne pigment concentration slurry at lower viscosity, and help to shorten the grinding time.

5、805 It has good versatility and high efficiency in water-based system and pigment concentrated pulp.

6、Excellent pseudoplasticity: under the action of high shear, and the original viscosity is restored immediately when the external force is eliminated —— This pseudoplasticity has excellent effect on production, canning, construction (rolling coating, spraying, immersion coating, etc.), improve the tank opening effect; This pseudoplasticity has excellent anti-splash effect: it can not only control the size of microdroplets during spraying, but also prevent excessive atomization, and has good protection effect for the field construction personnel of coatings and pesticides and reduce the loss of materials.

【Usage suggestions】

Application field: it is recommended for anti-sedimentation of water-based color slurry, filler and extinction concentrate, water-based coating, emulsion, adhesive, pesticide, ceramics, dyeing, textile slurry, cleaning agent, detergent, hydrometallurgy and other water systems; it is also applicable to control touch degeneration flow behavior or to improve flow resistance and leveling.

This product is suitable for anionic, non-ionic and other systems, not suitable for cationic system.

Recommended dosage: The dosage depends on the specific requirements of the system —— Settlement prevention: 0.3 2.0%

                                                              Anti-flow hanging: 0.5-3.0%

It is best to add to the grinding and dispersion for at least 30 minutes.

Post addition: it is recommended to add 2-5% pregel.

It is recommended to test the rheological effect under the adding process, filling process and construction conditions respectively, and the amount is added to achieve the desired effect.

【Packaging and Storage】

20,50 kg / barrel;

As long placement may produce stratification phenomenon, please be sure to check and stir thoroughly before use;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

SW 950

Inorganic pigment universal wetting dispersant

【Product Overview】

950 has excellent wetting dispersion performance on the Exteriorof various inorganic powder, which is suitable for wetting dispersion of inorganic pigments in water-based coatings; improve the storage stability of coatings and help to reduce the floating color and hair defects of the paint system; 950 can be used with various water-based wetting and dispersing agents, with good mixing performance; high dispersion efficiency, prepare color slurry with high pigment content and enhance the color spread of pigments.

【Physical and chemical properties】

【Application advantage】

1, it can significantly reduce the Exteriortension of the water-borne system

2, can improve the wettability of paint film to a variety of substrates

3, effectively prevent the floating color and hair flowers of the external wall color mixing system

4, especially suitable for the manufacture of high pigment content of the factory building color pulp

【Usage suggestions】

Recommended dosage (wt%, pigment): 1.0-5%.0

First, the dispersant, defoaming agent and other added to water and then add a variety of powder, and then disperse and grinding

The change in the PH value of the used system had no significant effect on the performance of the wetting agent

【Packaging and Storage】

30 or 50 kg / BBL;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

SW 953

Non-ionic type wetting agent

【Product Overview】

953 is a high concentration non-ionic wetting dispersion agent, suitable for water-based or non-waterborne coating, can be used for the dispersion of pigments and fillers in the process of paint or color slurry preparation, increase the coating luster, color spread, and improve the floating color stratification phenomenon in the tank of latex coating.

【Physical and chemical properties】

【Application advantage】

1、Have good and stable wetting dispersion of pigments and fillers;

2、Provide color display and stability;

3、Eliminate the coating film white, avoid hair flowers and floating color;

4、Easy to adjust the color, on the phthalocyanine blue or phthalocyanine green effect is obvious;

5、Enhance the effect of emulsifier in the pre-dispersion system, prolong the storage period of coating or heat resistance and mechanical vibration;

【Usage suggestions】

The added amount is 0.2 ~ 0.5% of the total amount of the finished paint, and it is added before grinding and dispersing

This product can also be used together with the color paste

The change in the PH value of the used system had no significant effect on the performance of the wetting agent

If the paint color display is not ideal, it can be directly added to the finished paint, but it is higher than that applied in the dispersion stage.

【Packaging and Storage】

30,50,200 kg / barrel;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

SW 955

General wetting agent

【Product Overview】

955 has excellent wetting dispersion performance on the Exteriorof various inorganic and organic powder, and is suitable for various pure color or mixed slurry of the water system; it can improve the wetting of the paint film to a variety of substrate; it can significantly reduce the Exteriortension of the water system, especially at low concentration; improve the storage stability of the paint and reduce the floating color and hair of the paint system; 955 can be used with various types of wetting and dispersion, and has good mixing performance.

【Physical and chemical properties】

【Application advantage】

1、Strong versatility, excellent wetting and dispersion performance on the Exteriorof all kinds of inorganic and organic powder;

2、Can improve the wettability of paint film to a variety of substrates;

3、Help to prevent the floating color and hair flowers of the external wall color mixing system;

4、It will not solidify at low temperature;

【Usage suggestions】

Recommended dosage (wt%, measured by pigment amount) : 0.15-1.0% for inorganic powder, 0.3-5.0% for organic powder

First wetting agent, dispersant, defoamer, etc. are added to the water to disperse, and then various powders are added, and then dispersed and sanded

The PH value of the system used has no significant effect on the performance of the wetting agent.

【Packaging and Storage】

30,50,200 kg / barrel;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

SW 956

General wetting agent

【Product Overview】

956 has excellent wetting dispersion on the Exteriorof various inorganic powder, and is suitable for various pure color or mixed slurry; it can improve the wetting of paint film and the Exteriortension of the substrate system, especially at low concentration; improve the storage stability of paint, help reduce the disadvantages of the paint system; 956 can be used with the wetting and dispersant.

【Physical and chemical properties】

【Application advantage】

1、Strong versatility, the Exteriorof various inorganic powder has excellent wetting dispersion performance;

2、Can improve the wettability of paint film to a variety of substrate;

3、Help to prevent the floating color and hair flowers of the external wall color mixing system;

4、It will not solidify at low temperature;

【Usage suggestions】

Recommended dosage (wt%, measured by pigment amount) : 0.15-1.0% for inorganic powder, 0.3-5.0% for organic powder

First wetting agent, dispersant, defoamer, etc. are added to the water to disperse, and then various powders are added, and then dispersed and sanded

The PH value of the system used has no significant effect on the performance of the wetting agent.

【Packaging and Storage】

30,50,200 kg / barrel;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

SW 965

Low bubble wetting agent

【Product Overview】

965 has excellent wetting dispersion performance on the Exteriorof various inorganic and organic powder, which can significantly reduce the Exteriortension of water system, especially at low concentration; it can improve the wettability of paint film to various substrate, improve the storage stability of paint, and help to reduce the floating color and defects of paint system; 965 can be used with various wetting and dispersing agents, with good mixed performance. It can be used for a variety of color slurry system that requires wetting inorganic and organic powder, especially for external wall color paint and color slurry system.

【Physical and chemical properties】

【Application advantage】

1、For a variety of inorganic, organic powder Exteriorhas excellent wetting dispersion performance;

2、Excellent low bubble, foam suppression performance, the higher the system temperature, the less foam compared with other wetting agents;

3、Can improve the wettability of paint film to a variety of substrates;

4、Help to prevent the floating color and hair flowers of the external wall color mixing system;

5、Excellent frost resistance performance, -5℃ above storage for liquid, good film forming performance;

6、Excellent environment-friendly products, no APE, biodegradable;

【Usage suggestions】

Recommended dosage (wt%, measured by pigment amount) : 0.10-1.0% for inorganic powder, 0.3-5.0% for organic powder

First wetting agent, dispersant, defoamer, etc. are added to the water to disperse, and then various powders are added, and then dispersed and sanded

Anions will become cloudy when stored, but the change of PH value of the system used has no significant effect on the performance of the wetting agent

【Packaging and Storage】

30,200 kg / barrel;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

SW 968

Anion wetting agent

【Product Overview】

968 is a special anionic Exterioractive agent, which is suitable for the wetting dispersion of various inorganic and organic pigments in waterborne coatings; improve the storage stability of paint, and helps to reduce the floating color and hair of paint system; 968 can be used with other wetting and dispersing agents of various water types, with good mixed performance; excellent wetting dispersion can reduce grinding time and grinding viscosity; can prepare high pigment content and enhance the color spread of pigments.

【Physical and chemical properties】

【Application advantage】

1、It can significantly reduce the Exteriortension of the water-based system, especially at low concentrations;

2、For a variety of inorganic, organic pigments have excellent wetting and dispersion ability;

3、Rffectively prevent the floating color and hair flowers of the external wall color mixing system;

4、Suitable for a variety of water-based adhesives to various Exteriorwetting;

【Usage suggestions】

Recommended dosage (wt%, pigment): 1.0-5.0％;

First, the wetting agent, dispersant agent, defoaming agent and so on are added to the water to disperse and then add a variety of powder, and then disperse and grinding

The change in the PH value of the used system had no significant effect on the performance of the wetting agent

【Packaging and Storage】

30 or 50 kg / BBL;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

FA 085

Ammonium salt dispersant

【Product Overview】

085 For titanium dioxide, talc powder, calcium carbonate and other inorganic powders have excellent dispersion effect; sharply reduce the viscosity of abrasives, shorten the grinding time, stabilize the pigment dispersion system, prevent organic pigment flocculation, reduce floating color, flower tendency. Because this product uses ammonia neutralization, it is particularly suitable for high gloss paint film and improved water resistance; 085 can be used alone or together with other types of dispersants. Can be used in a variety of water-based industrial paint and pigment concentrated pulp.

【Physical and chemical properties】

【Application advantage】

1、The special structure (copolymer of methacrylic acid) has better dispersion and storage stability, better luster display performance, and better lower bubble than the commercially available polyacrylate ammonia dispersant;

2、To provide excellent water resistance to the paint film;

3、Prevent color pulp flocculation, reduce the tendency of floating color, hair and other flowers, especially suitable for external wall color paint;

4、Improve the luster of the paint film display;

【Usage suggestions】

Recommended dosage (wt%, pigment):0.3-4.0％;

First, the dispersant, defoaming agent and other added to water and then add a variety of powder, and then disperse and grinding

Cations, multivalent metal ions and other unstable substances should not be contacted during storage

【Packaging and Storage】

30,50,200 kg / barrel;

It should be closed after use;

Put in a temperature of 5-35℃ environment, avoid exposure-.

FA 095

Sodium salt dispersant

【Product Overview】

095 For titanium dioxide, talc, calcium carbonate, qunqing and other inorganic powder has excellent dispersion effect, sharply reduce the arasiasive viscosity, shorten the grinding time, stable pigment dispersion system, help to prevent organic pigment flocculation, reduce floating color, hair and other tendency. Improve the storage stability of coating, increase luster and leveling performance; 095 can be used with other inorganic, organic dispersion and non-ionic wetting agent; excellent low bubble performance; high dispersion efficiency, low dosage, can be used for various water system requiring dispersed inorganic powder; have excellent compatibility with various thickening agent and rheagent in coating.

【Physical and chemical properties】

【Application advantage】

1、This methacrylic acid copolymer sodium salt dispersant has better stability, better luster, more excellent low bubble performance, anti-sedimentation effect is obvious;

2、Especially suitable for the grinding of ultra-fine size Exteriorfiller, such as ultrafine heavy calcium, ultra-fine talc powder. Outstanding dispersion ability, cost-effective;

3、Improve the leveling performance of the system;

4、Improve the luster of the paint film display;

5、Low bubble;

【Usage suggestions】

Recommended dosage (wt%, pigment):0.3-2.0％;

First, the dispersant, defoaming agent and other added to water and then add a variety of powder, and then disperse and grinding

Cations, multivalent metal ions and other unstable substances should not be contacted during storage

【Packaging and Storage】

30,50,250 kg / barrel;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

FU 281

Universal type of wetting dispersant

【Product Overview】

This product is a non-ionic wetting dispersagent with excellent performance, wide versatility (can be used for oil, solvent, water and other systems), it is suitable for a variety of base (resin) color paste and pigment Exteriortreatment, especially for industrial anticorrosive coatings, has good performance display, does not affect the salt spray resistance of coatings; in many industrial coating field, has good compatibility for a variety of fillers.

【Physical and chemical properties】

【Application advantage】

1、The product has good compatibility with a variety of powder and part of the water-based resin system, with little side effects, suitable for a variety of inorganic / organic face filler system;

2、Excellent dispersion performance and coating stability, can make the coating to achieve a better luster and ensure the high luster reproducibility after the coating;

3、Suitable for a variety of content of the yan filler system, especially in the high filling coating can significantly reduce the viscosity of the system;

4、This product is a non-ionic system, can be applied to a variety of anionic, cationic and non-ionic system resin compatibility, especially for industrial anticorrosive coatings have a good performance display, does not affect the salt spray resistance of coatings;

5、Especially suitable for a variety of metal Exteriorof excellent anti-corrosion primer, metal substrate decoration system and a variety of plastic coatings;

6、Not suitable for the resin system with solvent oil as the carrier;

【Usage suggestions】

It is recommended that this product be added before adding powder, and a mixed solvent 5-10 times (the ratio of propylene glycol and propanl is 2:1) is used to less than 10% of the active part, and the amount of addition depends on the product:

1、For the slurry system without base material:

Inorganic pigments and fillers: 2-10%

Organic pigments: 30-50%

2. For the two-component epoxy coating system:

Pigment and filler content: 3-10%

After adding, stir evenly, and then add the powder to dispersion or grinding, the specific adding amount and adding process according to the specific production formula and process, to achieve the desired effect, but the temperature of the system must be <60℃;

Low temperature (<10℃) storage may be cloudy and crystallization may occur. Once turbidity or crystallization occurs, please heat to about 30℃ to completely dissolved and shake after use, this treatment does not affect the performance of the product;

This product is suitable for a variety of no base material (resin) color pulp and pigment Exteriortreatment;

This product is mainly used as solvent type and solvent free two-component epoxy coating wetting agent;

【Packaging and Storage】

50 / 150 / 1000 kg / pack;

After use, it should be closed to prevent the invasion of debris or the loss of active ingredients, placed in a temperature of 10-35℃, in a cool place to avoid light and freezing;

Shelf life: <18 months.

DO 252

General type of water-based defoaming agent

【Product Overview】

252 has good compatibility with various water-based systems with little side effects; excellent bubble suppression performance and persistent performance, and the general performance of broad spectrum; 252 can be used alone with good effect; this product is non-ionic system, can be suitable for various anionic, cationic and non-ionic systems; especially suitable for various architectural coatings, adhesives, emulsion, water-based color slurry and other water-based systems.

【Physical and chemical properties】

【Application advantage】

1、Excellent foam suppression performance and persistent performance;

2、Because it does not contain silicone, it can effectively avoid various side effects caused by silicone oil;

3、Good general performance, high cost performance;

4、Does not affect the luster of the paint film display;

【Usage suggestions】

Recommended dosage (wt%, in total amount):0.2-1.0％;

It is suggested that this product should be added twice during use, and the specific amount should be added according to the actual production formula and process to achieve the best effect

The PH value of the defresaming system has little influence on the performance of the product and is effective in a wide range of PH values

Stramination may occur during storage and must be stirred well before use

【Packaging and Storage】

20,180 kg / barrel;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

DO 252A

General type of water-based defoaming agent

【Product Overview】

252A has good compatibility with various water-based systems with little side effects; excellent bubble suppression performance and persistent performance, broad spectrum general performance; 252A can be used alone with good effect; this product is non-ionic system, can be suitable for anoaming of anionic, cationic and non-ionic systems; especially for various architectural coatings, water, adhesive, water-based inorganic slurry systems.

【Physical and chemical properties】

【Application advantage】

1、Excellent foam suppression performance and persistent performance;

2、Good general performance, high cost performance;

3、Does not contain environmentally prohibited substances;

【Usage suggestions】

Recommended dosage (wt%, in total amount):0.2-1.0％；

It is suggested that this product should be added twice during use, and the specific amount should be added according to the actual production formula and process to achieve the best effect

The PH value of the defresaming system has little influence on the performance of the product and is effective in a wide range of PH values

Stramination may occur during storage and must be stirred well before use

【Packaging and Storage】

25,180 kg / barrel;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

DO 256

General type of water-based defoaming agent

【Product Overview】

As a broad-spectrum debulaming agent, 256 has outstanding rapid, strong foam suppression and versatility for multiple waterborne systems; the product has good compatibility and little side effects; 256 can be used alone; this product can be suitable for multiple anionic and non-ionic systems; especially for various architectural coatings, adhesives and emulsion.

【Physical and chemical properties】

【Application advantage】

1、Broad-spectrum defoaming agent, good general performance;

2、Good compatibility;

3、Quick break bubble ability;

4、Because it does not contain silicone, it can effectively avoid all kinds of side effects caused by silicone oil;

【Usage suggestions】

Recommended dosage (wt%, in total amount):0.2-1.0％;

It is suggested that this product should be added twice during use, and the specific amount should be added according to the actual production formula and process to achieve the best effect

The PH value of the defresaming system has little influence on the performance of the product and is effective in a wide range of PH values

Stramination may occur during storage and must be stirred well before use

【Packaging and Storage】

20 or 40 kg / BBL;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

DO 257

General type of water-based defoaming agent

【Product Overview】

257 has good compatibility with various water-based systems with little side effects; excellent bubble suppression performance and persistent performance, and the general performance of broad spectrum; 257 can be used alone with good effect; this product is non-ionic system, can be suitable for various anionic, cationic and non-ionic systems; especially suitable for various architectural coatings, adhesives, emulsion, water-based color slurry and other water-based systems.

【Physical and chemical properties】

【Application advantage】

1、Excellent foam suppression performance and persistent performance;

2、Containing silicone modified hydrophobic particles, defoaming ability is outstanding;

3、The effect of broken fine bubble is obvious;

4、Excellent construction performance;

5、Does not affect the luster of the paint film display;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-1.0％;

It is suggested that this product should be added twice during use, and the specific amount should be added according to the actual production formula and process to achieve the best effect

Because it contains silicone, please adjust the amount of formula before use to avoid various side effects

The PH value of the defresaming system has little influence on the performance of the product and is effective in a wide range of PH values

Stramination may occur during storage and must be stirred well before use

【Packaging and Storage】

20,180 kg / barrel;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

DO 257X

General type of water-based defoaming agent

【Product Overview】

As a broad-spectrum defoaming agent, 257X has outstanding rapid defolation, strong foam suppression and versatility for various water systems; the product has good compatibility and little side effects; 257X can be used alone; this product can be used for multiple anionic and nonionic systems; especially for various architectural coatings, adhesives, and emulsion.

【Physical and chemical properties】

【Application advantage】

1、Broad-spectrum defoaming agent, with good general performance;

2、Good ability to break the bubble quickly;

3、Good long-term performance;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-1.0％;

It is suggested that this product should be added twice during use, and the specific amount should be added according to the actual production formula and process to achieve the best effect

The PH value of the defresaming system has little influence on the performance of the product and is effective in a wide range of PH values

Stramination may occur during storage and must be stirred well before use

【Packaging and Storage】

20,180 kg / barrel;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

DO 258

Antiofoam for water eous high-adhesive system

【Product Overview】

258 As a broad-spectrum defoaming agent, it has outstanding rapid anti-foaming, strong foam-suppression, universality, durability and lasting effect for a variety of water systems, especially in high viscosity coatings; it has strong anti-foaming ability, which will not affect the luster of the coating, and has good coating.258 can be used alone can have good effect; this product is non-ionic system, can be applicable to various anionic, cationic and nonionic system; especially suitable for a variety of building coatings, adhesives, emulsion and other water-based systems.

【Physical and chemical properties】

【Application advantage】

1、Excellent bubble suppression ability in the high viscosity system;

2、Polyether-containing modified silicone hydrophobic particles, broken fine bubble effect is significant;

3、Good recoating;

4、Non-ionic system, a wide range of application;

5、Does not affect the luster of the paint film display;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.5-1.5%;

It is suggested that this product should be added twice during use, and the specific amount should be added according to the actual production formula and process to achieve the best effect

Because it contains silicone, please adjust the amount of formula before use to avoid various side effects

The PH value of the defresaming system has little influence on the performance of the product and is effective in a wide range of PH values

Stramination may occur during storage and must be stirred well before use

【Packaging and Storage】

25,180 kg / barrel;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

DO 259

General type of water-based defoaming agent

【Product Overview】

259 As a cost-effective anti-foaming agent, it is suitable for systems with high anofoam effect, long-term effect and good compatibility; this product is suitable for various anionic and non-ionic systems; especially for water systems such as building coatings, adhesives, and emulsions.

【Physical and chemical properties】

【Application advantage】

1、Broad-spectrum defoaming agent, good general performance;

2、Good compatibility, less lead to paint film defects;

3、Outstanding rapid break bubble ability;

【Usage suggestions】

Recommended dosage (wt%, in total volume): 0.2-0.6%;

It is suggested that this product should be added twice during use, and the specific amount should be added according to the actual production formula and process to achieve the best effect

The PH value of the defresaming system has little influence on the performance of the product and is effective in a wide range of PH values

Stramination may occur during storage and must be stirred well before use

【Packaging and Storage】

20,180 kg / barrel;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

DO 265

General type of water-based defoaming agent

【Product Overview】

As a molecular grade defoaming agent, 265 has outstanding rapid defolation, strong foam suppression and versatility for multiple waterborne systems; the product has good compatibility and little side effects; 265 can have good effects; this product can be suitable for multiple anionic and non-ionic systems; especially for architectural coatings, adhesives and emulsion.

【Physical and chemical properties】

【Application advantage】

1、Broad-spectrum defoaming agent, good general performance;

2、Good compatibility, it is not easy to lead to paint film defects;

3、Outstanding rapid break bubble ability;

4、Because it does not contain silicone, it can effectively avoid all kinds of side effects caused by silicone oil;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-1.0％;

It is suggested that this product should be added twice during use, and the specific amount should be added according to the actual production formula and process to achieve the best effect

The PH value of the defresaming system has little influence on the performance of the product and is effective in a wide range of PH values

Stramination may occur during storage and must be stirred well before use

【Packaging and Storage】

20,180 kg / barrel;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

DO 266

General type of water-based defoaming agent

【Product Overview】

As a broad-spectrum debulaming agent, 266 has outstanding rapid, strong foam suppression and versatility for multiple waterborne systems; the product has good compatibility and little side effects; 266 can be used alone with good results; this product can be suitable for multiple anionic and non-ionic systems; especially for various architectural coatings, adhesives, emulsion and other systems.

【Physical and chemical properties】

【Application advantage】

1、Broad-spectrum defoaming agent, good general performance;

2、Good compatibility, it is not easy to lead to paint film defects;

3、Good ability to break bubbles quickly;

4、Because it does not contain silicone, it can effectively avoid all kinds of side effects caused by silicone oil;

【Usage suggestions】

Recommended dosage (wt%, in total volume): 0.2-0.8%

It is suggested that this product should be added twice during use, and the specific amount should be added according to the actual production formula and process to achieve the best effect

The PH value of the defresaming system has little influence on the performance of the product and is effective in a wide range of PH values

Stramination may occur during storage and must be stirred well before use

【Packaging and Storage】

20,180 kg / barrel;

It should be closed after use;

In a temperature of 5-35℃ environment, avoid exposure.

DP 2540

Dry powder foaming agent

【Product Overview】

   This product is a kind of wide-spectrum powder deoaming agent with excellent performance and universal light, which is a mixture of special polyether, hydrophobic white carbon black, emulsifier, liquid hydrocarbon and inorganic carrier, and has a good effect of deoaming and foam suppression for a variety of powder deoaming systems.

【Physical and chemical properties】

【Application advantage】

1、The product has good compatibility with a variety of powder and water system, little side effects;

2、Has very good liquidity, its powder has very good mixing performance, good operability;

3、It can be used alone and can have a good effect;

4、Excellent foam suppression, defoaming performance and persistent performance, broad spectrum of general performance, broad compatibility performance;

5、This product is a non-ionic system, can be applied to a variety of anionic, cationic and non-ionic system anoaming;

6、Especially suitable for all kinds of waterborne powder system (such as dry mortar, self-leveling mortar, double component waterproof, dry powder putty, all kinds of concrete systems, cement seam agent, etc.), pesticide powder, solid Exterioractive agent production and other kinds of waterborne system need to add solid defoaming agent;

【Usage suggestions】

Recommended dosage (wt%, in total): 0.1~1.0% (for the system);

It is suggested that this product uses the powder to stir evenly, can also add water and then added to the water system, the specific adding amount and adding process according to the specific production formula and process, to achieve the desired effect;

The anoaming group is special, and its side effects are small, but the user must confirm the good compatibility performance of the applied formula;

The PH value of the defresaming system has little impact on the performance of the product, and is effective in a wide range of PH values;

Separation phenomenon will not occur during storage, with excellent stability.

【Packaging and Storage】

35 kg / pack;

After use, it should be closed to prevent the invasion of debris or the loss of active ingredients, placed in a temperature of 5-35℃, in a cool place;

Shelf life: 12 months.

DP 2540B

Dry powder foaming agent

【Product Overview】

This product is a kind of wide-spectrum powder deoaming agent with excellent performance and universal light, which is a mixture of special polyether, hydrophobic white carbon black, emulsifier, liquid hydrocarbon and inorganic carrier, and has a good effect of deoaming and foam suppression for a variety of powder deoaming systems.

【Physical and chemical properties】

【Application advantage】

1、The product has good compatibility with a variety of powder and water system, little side effects;

2、Has very good liquidity, its powder has very good mixing performance, good operability;

3、It can be used alone and can have a good effect;

4、Excellent foam suppression, defoaming performance and persistent performance, broad spectrum of general performance, broad compatibility performance;

5、This product is a non-ionic system, can be applied to a variety of anionic, cationic and non-ionic system anoaming;

6、Especially suitable for all kinds of waterborne powder system (such as dry mortar, self-leveling mortar, double component waterproof, dry powder putty, all kinds of concrete systems, cement seam agent, etc.), pesticide powder, solid Exterioractive agent production and other kinds of waterborne system need to add solid defoaming agent;

【Usage suggestions】

Recommended dosage (wt%, in total): 0.1~1.0% (for the system);

It is suggested that this product uses the powder to stir evenly, can also add water and then added to the water system, the specific adding amount and adding process according to the specific production formula and process, to achieve the desired effect;

The anoaming group is special, and its side effects are small, but the user must confirm the good compatibility performance of the applied formula;

The PH value of the defresaming system has little impact on the performance of the product, and is effective in a wide range of PH values;

Separation phenomenon will not occur during storage, with excellent stability.

【Packaging and Storage】

35 kg / pack;

After use, it should be closed to prevent the invasion of debris or the loss of active ingredients, placed in a temperature of 5-35℃, in a cool place;

Shelf life: 12 months.

DP 2658

Dry powder foaming agent

【Product Overview】

     This product is a wide spectrum of powder defoaming agent with excellent performance, universal light, it is a mixture of special polyethylene glycol ether, emulsifier, hydrophobic white carbon black, liquid hydrocarbon and inorganic carrier, which has a good effect of deoaming and foam suppression for a variety of powder deoaming agent systems.

【Physical and chemical properties】

【Application advantage】

1、The product has good compatibility with a variety of powder and water system, less side effects;

2、Has very good liquidity, its powder has very good mixing performance, good operability;

3、It can be used alone and can have a good effect;

4、Excellent foam suppression, defoaming performance and persistent performance, broad spectrum of general performance, broad compatibility performance;

5、This product is a non-ionic system, can be applied to a variety of anionic, cationic and non-ionic system anoaming;

6、Especially suitable for all kinds of waterborne powder system (such as dry mortar, self-leveling mortar, double component waterproof, dry powder putty, all kinds of concrete systems, cement seam agent, etc.), pesticide powder, solid Exterioractive agent production and other kinds of waterborne system need to add solid defoaming agent；

【Usage suggestions】

Recommended dosage (wt%, in total): 0.1~2.0% (for the system);

It is suggested that this product uses the powder to stir evenly, can also add water and then added to the water system, the specific adding amount and adding process according to the specific production formula and process, to achieve the desired effect;

The anoaming group is special, and its side effects are small, but the user must confirm the good compatibility performance of the applied formula;

The PH value of the defresaming system has little impact on the performance of the product, and is effective in a wide range of PH values;

Separation phenomenon will not occur during storage, with excellent stability.

【Packaging and Storage】

45 kg / barrel;

After use, it should be closed to prevent the invasion of debris or the loss of active ingredients, placed in a temperature of 5-35℃, in a cool place;

Shelf life: 12 months.

DP 2658B

Dry powder foaming agent

【Product Overview】

    This product is a wide spectrum of powder deoaming agent with excellent performance and universal light, which is a mixture of special polyether, emulsifier, hydrophobic white carbon black, liquid hydrocarbon and inorganic carrier, and has a good effect of deoaming and foam suppression for a variety of powder deoaming systems.

【Physical and chemical properties】

【Application advantage】

1、The product has good compatibility with a variety of powder and water system, and reduces side effects such as oil spots;

2、Has very good liquidity, its powder has very good mixing performance, good operability;

3、It can be used alone and can have a good effect;

4、Excellent foam suppression, defoaming performance and persistent performance, broad spectrum of general performance, broad compatibility performance;

5、This product is a non-ionic system, can be applied to a variety of anionic, cationic and non-ionic system anoaming;

6、Especially suitable for all kinds of waterborne powder system (such as dry mortar, self-leveling mortar, double component waterproof, dry powder putty, all kinds of concrete systems, cement seam agent, etc.), pesticide powder, solid Exterioractive agent production and other kinds of waterborne system need to add solid defoaming agent;

【Usage suggestions】

Recommended dosage (wt%, in total): 0.1~1.0% (for the system);

It is suggested that this product uses the powder to stir evenly, can also add water and then added to the water system, the specific adding amount and adding process according to the specific production formula and process, to achieve the desired effect;

The anoaming group is special, and its side effects are small, but the user must confirm the good compatibility performance of the applied formula;

The PH value of the defresaming system has little impact on the performance of the product, and is effective in a wide range of PH values;

Separation phenomenon will not occur during storage, with excellent stability.

【Packaging and Storage】

15 kg / pack;

After use, it should be closed to prevent the invasion of debris or the loss of active ingredients, placed in a temperature of 5-35℃, in a cool place;

Shelf life: 12 months.

WN 810

Water-based water splashing agent

【Product Overview】

810 is an efficient Exteriorhydrophobic agent, which can significantly reduce the Exteriortension of the coating film; the protective film can produce good water splashing effect on rain water and reduce the attachment of dust in air; it can be used in various coating systems, but improve the cost performance for mid-grade external wall emulsion paint; it can be used for the hydrophobic coating of various paper and fabrics.

【Physical and chemical properties】

【Application advantage】

1、In the medium and low PVC system, the paint film can be given a good hydrophobic;

2、In the high PVC, the system, can effectively reduce the amount of emulsion, improve the hand feel and viscosity resistance;

3、Good anti-adhesion properties;

【Usage suggestions】

Recommended dosage (wt%, in total amount): latex paint: 0.5-5.0%, paper and fabric: 5-100%

First, dilute the product with water or add it directly, and slowly add it to the latex paint with well adjusted viscosity until the desired effect is achieved

It is recommended to adjust the PH value of the selected system before the addition of this product, which is not suitable for the acidic system

No cations, multivalent metal ions and other unstable substances can be contacted during storage and use

【Packaging and Storage】

25,100 kg / barrel;

After use, it should be closed to prevent debris intrusion

Put it in a temperature of 5-35℃, avoid insolation and freezing.

WP 070

Polyolefin dispersion used for waterborne protective coatings

【Product Overview】

WP 070 not only has shielding, flexibility, water resistance, oil resistance and chemical resistance, but also has excellent bonding, thermal bonding strength, transparency, low thermal sealing temperature. WP 070 does not require film formation or a cosolvent to dry film formation at room temperature. However, in order to get the best film, we recommend the drying temperature of 40°C, and whether a higher temperature is needed to eliminate the moisture depends on the thickness of the film and the porosity of the substrate.

WP 070 film is transparent, flexible, and in line with FDA standards, not only has a fairly good bonding force, but also has water resistance, oil resistance and solvent resistance performance. Adding glue to paper and fabric can improve the intrinsic bonding, tensile strength and folding resistance of the entire system. Its film is transparent and soft, which can increase the shielding performance of laminating film.

【Physical and chemical properties】

【Application advantage】

1、Good high adhesion, excellent bonding performance, used in water-based industrial coatings, ink painting and light oil additives;

2、For a variety of different substrates 【polar or non-polar】) (glass, leather, metal, nylon 6 and nylon 66, paper / cardboard, polyurethane, polyethylene, wood) Exteriorhas good bonding performance;

3、For a variety of fillers or pigments (calcium carbonate, carbon black, clay, dye, inorganic pigments, organic pigments, titanium dioxide, zinc oxide, have good compatibility performance);

4、The coating film has strong rewetting resistance;

5、Has a good isolation of air and water vapor function;

6、Excellent adhesion, excellent flexibility and impact resistance;

【Usage suggestions】

Recommended dosage (wt% in total): 30-90%；

Do not make contact with cations, multivalent metal ions and other unstable substances during storage;

WP 070 is an excellent choice of coatings or additives in many different fields, listing (but not limited to) WP 070: non-woven binders, extrusion coatings, flexible film (non-textile) coatings, printing process, hot sealing coatings, laminated adhesives, pharmaceutical packaging, gilded paper, paper coating, paper, and fabric adhesive

Polyolefin resin can choose low viscosity coator, including concave, flexible, air scraping and roll coating.

Stability of dispersion: WP 070 has good dilution stability. When diluted with soft water, as long as the system solid component is more than 10%, it can maintain good stability.

Please pay attention to protect your skin and eyes. If not, please rinse with water and seek medical advice in time.

【Packaging and Storage】

50,150,1000 kg / barrel;

It should be closed after use;

Put it in a cool environment with a temperature of 5-35℃, avoid direct light, avoid exposure, and have an effective storage period of 12 months.

UA 357

Vulnerable neutralizing agent

【Product Overview】

357 is an organic alcohol amine compound, weakly alkaline, low volatile, better PH stability than ammonia; 357 low odor, can replace ammonia in emulsion, coating and other formulas, which is volatile and will not remain in the paint film, so it can be applied in highlight coatings and has excellent water resistance; especially suitable for various water systems such as building coatings, adhesives and emulsion.

【Physical and chemical properties】

【Application advantage】

1、Excellent coating neutralizing agent;

2、It can be used as a post-additive to effectively reduce the low shear viscosity and improve the fluidity and smoothness of the coating;

3、Improve the storage stability of the system;

4、Improve the water resistance of the paint film;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-1.0%

The product can be added at any stage and should be added

【Packaging and Storage】

25,200 kg / barrel;

It should be closed after use;

Place in the dark to avoid direct sunlight.

UA 451

Multifunctional organic amine additive

【Product Overview】

451 is an organic alcohol amine compound with weak alkaline, low volatility, can replace ammonia in the paint formula, reduce the unpleasant odor caused by volatile, will not remain in the paint film, so it can be used in highlight coatings and has excellent water resistance; it has strong wetting force, can improve the amount of wetting agent in 451 paint formula; especially suitable for water systems such as architectural coatings, adhesives, emulsion and so on.

【Physical and chemical properties】

【Application advantage】

1、Excellent coating PH regulator;

2、Help the wetting dispersion function, can effectively reduce the dosage of dispersant and wetting agent;

3、It can be used as a post-additive to effectively reduce the low shear viscosity and improve the fluidity and smoothness of the coating;

4、Assist in the anti-corrosion performance and improve the storage stability of the system;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.1-1.0%;

It is recommended to add this product before grinding, and slowly at the final stage of low mixing

Once in contact with the user, wash with water

【Packaging and Storage】

25,200 kg / barrel;

It should be closed after use;

Place in the dark to avoid direct sunlight.

UA 451A

Multifunctional organic amine additive

【Product Overview】

451A is an organic alcohol amine compound with low odor, it can replace ammonia in the paint formula, reduce the unpleasant odor caused by ammonia volatilization; it has certain volatility, will not remain in the paint film, so it can be applied in high gloss paint and has excellent water resistance; it has strong wetting force, can improve the dispersion stability of the packing, adding 451A can reduce the amount of wetting agent; especially suitable for various architectural coatings, self-drying paint, adhesive and emulsion.

【Physical and chemical properties】

【Application advantage】

1、Excellent coating PH regulator;

2、Help the wetting dispersion function, can effectively reduce the dosage of dispersant and wetting agent;

3、It can be used as a post-additive to effectively reduce the low shear viscosity and improve the fluidity and smoothness of the coating;

4、Assist in the anti-corrosion performance and improve the storage stability of the system;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.1-1.0%;

It is recommended to add this product before grinding, and slowly at the final stage of low mixing

Once in contact with the user, wash with water

【Packaging and Storage】

25,200 kg / barrel;

It should be closed after use;

Place in the dark to avoid direct sunlight.

UA 455

Low taste neutralizing agent

【Product Overview】

455 is an organic alcohol amine compound, weakly alkaline, low volatile, better PH stability than ammonia; 455 low odor, replace ammonia in emulsion, coating and other formulas, and the product is volatile and will not remain in the paint film, so it can be applied in highlight coatings and has excellent water resistance; especially suitable for various architectural coatings, adhesives, emulsion and other water systems.

【Physical and chemical properties】

【Application advantage】

1、Excellent coating neutralizing agent;

2、It can be used as a post-additive to effectively reduce the low shear viscosity and improve the fluidity and smoothness of the coating;

3、Improve the storage stability of the system;

4、Improve the water resistance of the paint film;

【Usage suggestions】

Recommended dosage (wt%, in total amount): 0.2-1.0%;

The product can be added at any stage and should be added

【Packaging and Storage】

25,200 kg / barrel;

It should be closed after use;

Place it in the dark (<30℃) to avoid direct sunlight.

PM 301

film-forming agent

【Product Overview】

Polyacrylate emulsion is a system of countless latex particles dispersed in water, Limited to the influence of Tg value and hydration layer, if the film forming is good, we must ensure that the construction temperature of the film forming (latex particles) to maintain a good plasticizing (adhesive) state to assemble the film, And the performance of the final product at least 90% depends on the quality of the membrane structure, The quality of the film depends on the compatibility of the film agent and the system, the diffusion speed, the drying speed (low temperature drying and high temperature membrane Exteriorcrust needs capillary action to introduce the internal water, etc.), To accommodate such comprehensive requirements, It is very difficult to resolve with a single compound alone, For the vacancy of this product and the need for self-use, Bona for the first time from the production, construction, application and other angles for self-drying, paint and other proposed a series of comprehensive solutions, The 300 series of products are constructed.

【Physical and chemical properties】

【Application advantage】

1、Excellent PA dispersion adhesive film forming aggregation agent, suitable for textile, leather, ink, paint and other PA systems of self-drying or baking film forming requirements;

2、Excellent self-dispersion performance and film forming efficiency coating initial water resistance, scrub resistance performance, auxiliary yan packing dispersion, diffusion uniformity;

3、Other characteristics: good cost performance, auxiliary substrate wetting, appropriate freezing and thawing stability;

4、Take into account the coalescence ability, low temperature drying speed, high temperature moisturizing performance, anti-hydrolysis ability;

【Usage suggestions】

Recommended dosage (wt%, total polymer amount): 0.3-10%；

Add slowly at low speed stirring according to the conventional process;

Once in contact with the user, wash with water

【Packaging and Storage】

200,1000 kg / barrel;

It should be closed after use;

Place in the dark to avoid direct sunlight.

PM 302

film-forming agent

【Product Overview】

Polyacrylate emulsion is a system of countless latex particles dispersed in water, Limited to the influence of Tg value and hydration layer, if the film forming is good, we must ensure that the construction temperature film forming (latex particles) to maintain a good plasticizing (adhesive) state to assemble the film, And the performance of the final product at least 90% depends on the quality of the membrane structure, The quality of the film depends on the compatibility of the film agent and the system, the diffusion speed, the drying speed (low temperature drying and high temperature membrane Exteriorcrust needs capillary action to introduce the internal water, etc.), To accommodate such comprehensive requirements, It is very difficult to resolve with a single compound alone, For the vacancy of this product and the need for self-use, Bona for the first time from the production, construction, application and other angles for self-drying, paint and other proposed a series of comprehensive solutions, The 300 series of products are constructed.

【Physical and chemical properties】

【Application advantage】

1、Excellent PA dispersion adhesive film forming aggregation agent, suitable for textile, leather, coating and other PA systems of self-drying film forming requirements;

2、Excellent self-dispersion performance and film forming efficiency coating initial water resistance, scrub resistance performance, auxiliary yan packing dispersion, diffusion uniformity;

3、Other characteristics: excellent cost performance, auxiliary substrate wetting, appropriate freezing and thawing stability;

4、Take into account the coalescence ability, low temperature drying speed, high temperature moisturizing performance, anti-hydrolysis ability;

【Usage suggestions】

Recommended dosage (wt%, in total): 0.3-10% (for polymer)

Add slowly at low speed stirring according to the conventional process;

Once in contact with the user, wash with water

【Packaging and Storage】

200,1000 kg / barrel;

It should be closed after use;

Place in the dark to avoid direct sunlight.